Sram Reportedly Doing the job On Smart Bike Technology

If you’ve been looking at my e-bike material right here on InsideEVs, then you know full effectively that the technological innovation bordering electric powered bicycles is advancing at a quick speed. As additional and much more tech will get thrown into e-bikes, it is getting a lot more and far more hard to distinguish them from IoT units. As these types of, a good deal of today’s e-bikes can merely be explained as smart mobility solutions.

Now, if you are thinking that it is only new organizations that are introducing slicing edge tech to the e-bicycle current market, think all over again. US-primarily based bicycle ingredient large Sram just lately submitted patents about a extravagant new piece of tech that could modify the way we interact with our bicycles. If up till now we’ve transformed gears with both a bring about shifter, grip shifter, or some variety of switch, Sram just may alter this into hand gestures or even voice instructions.

Sram Reportedly Working On Smart Bike Technology

Indeed, managing equipment by hand gestures and voice commands has been about for a number of several years now. We use virtual assistants like Siri and Alexa practically each day, and most of our automobiles have options that can be activated by the two gesture and voice. Why should not the similar be applied to bikes, right? Who’s to say that expressing “Sram, shift up a gear” won’t grow to be a typical detail in the foreseeable future of cycling?

All that remaining explained, the growth of automatic transmissions such as people from Enviolo could pretty properly make the complete shift-by-voice matter irrelevant. However, voice commands could also uncover use in large-end e-bikes with a number of ride modes. Possibly you could command your bike to switch from just one mode to yet another, or possibly even modify suspension settings on the fly. Just after all, we earlier noted that Sram experienced intentions of dabbling in the e-bike market with a recent acquisition of Amprio. Not to point out, premium bicycle suspension expert RockShox is a model beneath the Sram umbrella.

Sram Reportedly Working On Smart Bike Technology

Curiously, the proposed design and style of Sram’s gesture command attributes a glove with a bunch of sensors hooked up to the fingers. Though the probability of some type of shift-by-gesture technological know-how appears somewhat much fetched, it’s been speculated that the particular gloves could be utilised to control e-bicycle displays, as very well as toggling through many settings though on the go.

It is essential to observe that anything we’re speaking about below pertaining to Sram’s new models are purely speculation. If there’s 1 point we can conclusively arrive at, it is that Sram is a lot more than possible to release a thing huge when it will come to bicycle tech in the near future.

Read More

Rising Use of Smart Electronics Devices to Fuel Demand for MOVs in Consumer Electronics Sector

Company Logo

Company Logo

Global Market for Metal Oxide Varistors (MOV)

Global Market for Metal Oxide Varistors (MOV)

Global Market for Metal Oxide Varistors (MOV)

Dublin, June 19, 2023 (GLOBE NEWSWIRE) — The “Metal Oxide Varistors (MOV): Global Strategic Business Report” report has been added to ResearchAndMarkets.com’s offering.

The global market for Metal Oxide Varistors (MOV) estimated at US$11.3 Billion in the year 2022, is projected to reach a revised size of US$27.6 Billion by 2030, growing at a CAGR of 11.8% over the analysis period 2022-2030.

Ring MOV, one of the segments analyzed in the report, is projected to record a 12.4% CAGR and reach US$12.9 Billion by the end of the analysis period.

Taking into account the ongoing post pandemic recovery, growth in the Block MOV segment is readjusted to a revised 11.7% CAGR for the next 8-year period.

The U.S. Market is Estimated at $1.3 Billion, While China is Forecast to Grow at 13.5% CAGR

The Metal Oxide Varistors (MOV) market in the U.S. is estimated at US$1.3 Billion in the year 2022. China, the world’s second largest economy, is forecast to reach a projected market size of US$8.3 Billion by the year 2030 trailing a CAGR of 13.5% over the analysis period 2022 to 2030.

Among the other noteworthy geographic markets are Japan and Canada, each forecast to grow at 8.6% and 9.9% respectively over the 2022-2030 period. Within Europe, Germany is forecast to grow at approximately 9.6% CAGR.

Select Competitors (Total 94 Featured) –

  • Bourns, Inc.

  • Centra Science Corp

  • Dean Technology, Inc.

  • Elpro International Ltd.

  • Fenghua (HK) Electronics Ltd.

  • JOYIN CO., LTD.

  • KEMET Corporation

  • KOA Corporation

  • Littelfuse, Inc.

  • MDE Semiconductor, Inc.

  • Murata Manufacturing Co., Ltd.

  • Nippon Chemi-Con Corporation

  • Panasonic Corporation

  • SEMITEC Corporation

  • Songtian Electronics Co., LTD (STE)

  • TDK Corporation

  • Thinking Electronic Industrial Co., Ltd.

  • Vishay Intertechnology, Inc.

Key Attributes:

Report Attribute

Details

No. of Pages

404

Forecast Period

2022 – 2030

Estimated Market Value (USD) in 2022

$11.3 Billion

Forecasted Market Value (USD) by 2030

$27.6 Billion

Compound Annual Growth Rate

11.8%

Regions Covered

Global

Key Topics Covered:

I. METHODOLOGY

II. EXECUTIVE SUMMARY

1. MARKET OVERVIEW

  • Impact of COVID-19 Pandemic and Looming Global Recession

  • 2020 Marked as a Year of Disruption & Transformation

  • As the Race between the Virus & Vaccines Intensifies, Where is the World Economy Headed in 2021?

  • World Economic Growth Projections (Real GDP, Annual % Change) for 2020 through 2022

  • An Introduction to Metal Oxide Varistor (MOV)

  • Types of MOVs

  • Global Market Prospects & Outlook

  • Ring MOVs: The Largest Type

  • Competition

  • World Brands

  • Recent Market Activity

2. FOCUS ON SELECT PLAYERS

3. MARKET TRENDS & DRIVERS

  • Need to Ensure Reliability & Safety of Electrical Power Systems Enhances Significance of MOVs

  • Need for Protection Devices: Growth Opportunities for Metal Oxide Varistors

  • Automotive Electronics: Rising Demand for Communication Technologies Bodes Well for the Market

  • Average Value of In-Vehicle Electronics Per Vehicle (In US$) for the Years 2018, 2025 & 2030

  • Breakdown of the Total Cost of Electronics in an Automobile (in %) for the Years 1970, 1980, 2000, 2017, 2020 and

Read More

LG Electronics Recalls Free-Standing 86-Inch Smart Televisions and Stands Due to Serious Tip-Over and Entrapment Hazards (Recall Alert)

  • Recalled LG Electronics 86-inch Smart TV and stands
  • Recalled LG Electronics 86-inch Smart TV and stands showing model and serial number location

Name of Product:

LG 86-inch smart televisions and stands

Hazard:

The TV can become unstable while on the assembled stand, posing serious tip-over and entrapment hazards that can result in injuries or death to children and others.

Recall Date:

January 12, 2023

Units:

About 52,000 (In addition, about 1,800 were sold in Canada and about 2,900 were sold in Mexico)

Recall Details

Description:

This recall involves four LG Electronics 86-inch smart TV models with model numbers 86UQ8000AUB, 86UQ7070ZUD, 86UQ7590PUD, and 86NANO75UQA. The TVs (not including the stands) are 86-inches diagonally, 43.5-inches high, 76-inches wide, and 2.4-inches deep. They weigh approximately 100 pounds. The serial number of the recalled product begins with 202RM, 203RM, 204RM, 205RM, 206RM, 207RM, or 208RM and is located at the bottom right of the back of the TV, along with the model number. Consumers can also check the serial number by pressing the mute button, three times rapidly, on the original LG remote control provided with their TV.

 

Remedy:

Consumers using the TV’s supporting stand legs should immediately detach it and place the television in a safe location away from children. Contact LG Electronics for instructions on how to inspect the unit and to obtain replacement screws and stand parts, including help from a technician for a free repair. Consumers who wall-mounted their TVs do not need to stop using their TVs.

Incidents/Injuries:

LG Electronics has received 22 reports of TV stand instability, resulting in 12 reports of tip-overs. No injuries have been reported.

Sold At:

Walmart, Best Buy, Costco and other stores nationwide and online at Amazon.com, Walmart.com, Bestbuy.com and Costco.com from March 2022 through September 2022 for between $1,100 and $1,900.

Manufacturer(s):

LG Electronics Reynosa, S.A. de C.V., of Reynosa, Mexico

Importer(s):

LG Electronics U.S.A. Inc., of Englewood Cliffs, New Jersey

Individual Commissioners may have statements related to this topic.  Please visit www.cpsc.gov/commissioners to search for statements related to this or other topics.

About the U.S. CPSC

The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury or death associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. CPSC’s work to ensure the safety of consumer products has contributed to a decline in the rate of injuries associated with consumer products over the past 50 years.

Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.

For lifesaving information:

Report an unsafe product

Read More

Focus on Shopper Electronics, Electricity Harvesting, Medical Devices, Sensible Packaging, Smart Playing cards, Wearable Know-how

DUBLIN, Jan. 6, 2022 /PRNewswire/ — The “Printed Batteries Market place: World wide Industry Trends, Share, Measurement, Expansion, Prospect and Forecast 2021-2026” report has been added to ResearchAndMarkets.com’s presenting.

Research and Markets Logo

Investigate and Marketplaces Logo

The world printed batteries industry exhibited robust expansion all through 2015-2020. Looking forward, the sector is envisioned to increase at a CAGR of around 22% through (2021-2026).

Printed electronics is an umbrella term utilized for electronic products produced by printing on a assortment of substrates. Printed batteries are one of the critical components of printed electronics and use a variety of active materials from remedy-based inks. These inks are deposited underneath a substrate applying appropriate printing tactics, these kinds of as stencil, display screen, dispenser and spray printing, and dip or blade coating.

Currently, a huge assortment of printed batteries are readily available in the current market, this sort of as disposable and rechargeable batteries. Some of the frequently utilized anode and cathode resources utilized in printed batteries involve Lithium titanate (LTO) and lithium iron phosphate (LFP).

Printed batteries provide as an superb alternative to traditional batteries due to their cost-efficiency, compact construction, flexibility and portability. On account of these attributes, they are used in a number of apps, this sort of as radio-frequency sensing, beauty and medicinal patches, greeting cards sensor, info logging methods, interactive packaging and other purchaser electronics products.

The linked positive aspects, along with their increasing and diversified purposes, stand for the principal factors driving the industry progress. Moreover this, printed batteries are sustainable and environment-pleasant, which can significantly decrease content squander and permit quicker manufacturing because of to the significantly less complicated fabrication techniques.

With the enhancements in the World-wide-web of Matters (IoT) and wireless sensor technologies, there has been swift adoption of these batteries, which is acting as another important advancement-inducing variable.

Moreover, the main electronics firms are developing printed cells using 3D printing systems that are compatible with clever products and exhibit minimal volumetric growth, large rate functionality, security and stability. This is envisioned to push the industry in the coming several years.

Crucial Queries Answered in This Report

  • How has the international printed batteries sector executed so far and how will it execute in the coming decades?

  • What has been the effects of COVID-19 on the worldwide printed batteries industry?

  • What are the essential regional markets?

  • What is the break up of the marketplace based on the voltage assortment?

  • What is the break up of the market place based mostly on the product type?

  • What is the break up of the current market dependent on the software?

  • What are the many levels in the worth chain of the market?

  • What are the essential driving elements and worries in the business?

  • What is the composition of the world wide printed batteries current market and who are the essential players?

  • What is the diploma of level of competition in the sector?

Competitive Landscape

The aggressive landscape of the marketplace has also been examined with some of the

Read More